Shields

From Star Wars Combine :: Game Guide
Jump to: navigation, search

Shields refer to planetary shields that are created by active Shield Generators on a planet. The shield will cover a 3x3 area in the atmosphere centered on the city where the active Shield Generator is based. Travel is prevented through this shield in either ascending or descending actions but can be avoided as noted in the exceptions below.

How Do I Create a Shield?

You first need to build a Shield Generator, and provide it with sufficient power so that it can be activated. Once it is built and powered, the assigned Operator can then use the Building Management page to activate the shield. This is done in the following way:

  •  ::Control::
  • Click [Building Management].
  • Click the [Actions] button on the central horizontal bar.
  • Click the [Shields] button on the left side of the screen.
  • Click the [Status] button just under the central horizontal bar.
  • Click the [Activate] button.

Shields will take 1 hour to power up. During this period there will be nothing to prevent travel between the Atmosphere level and the Ground level. After this period, all travel will be prevented.

How Do I Remove a Shield?

Bar as yet unreleased Combat, the only way to remove a shield is for it to be switched off. This is similar to activating a shield, except the shield will be switched off. This will be instantaneous, rather than the 1 hour timer for activation.

  •  ::Control::
  • Click [Building Management].
  • Click the [Actions] button on the central horizontal bar.
  • Click the [Shields] button on the left side of the screen.
  • Click the [Status] button just under the central horizontal bar.
  • Click the [Deactivate] button.

How Do I Pass Through a Shield?

There are ways of passing through a shield.

The owner of the shield is able to approve access for certain people or factions. These will be able to pass through the shield without a problem.

Alternatively, if a player is able to get on board a ship or vessel which has permission to pass through the shield acting as a stowaway or a passenger then they can pass through it easily.

A third approach is to simply go around it. A shield only works blocking ships above from coming down. If you are able to proceed down to a terrain square which is not shielded you are then able to cross the terrain and move into the shielded area.

Attempting to pass through a shield which you have no access to go through currently blocks your action. You will be informed that there is a shield blocking your progress and that you cannot move further. You will not suffer any negative effects by attempting and failing to pass through a shield.

Linking a Shield Generator

If a Shield Generator